Link to the product and material list:http://rcexplorer.se/product/tricopte...

Index:
00:00:25 - Camera Plate
00:04:30 - Front arms - Mounting motors, soldering ESCs...
00:25:10 - Tilt mechanism
00:33:36 - Tilt mechanism - Attached servo horn version
00:43:30 - Back arm - Extending servo wire, mounting ESC...
00:47:40 - Current distribution and telemetry voltage
00:50:00 - Mounting the camera tray and arms
01:03:43 - Mounting the Flight controller and receiver
01:09:30 - Mounting the FPV transmitter
01:15:25 - Balancing propellers
01:19:47 - Motor bad bearings fix
01:21:10 - Center of gravity
01:22:00 - Beauty shots and flight video

Thank you for watching this video.
- David Windestål
http://RCExplorer.se

Turnigy Talon Tricopter (V1.0) & HK KK2.0 FirmwareV1.2 Vol.36 Test flight



Motor Layout : [ Tricopter mode V1.2 ] BT : [ Li-Po 3s 2200mA ] Test Flight !!
Turnigy Talon Tricopter (V1.0) Carbon Fiber Frame
+ Hobbyking KK2.0 Multi-rotor LCD Flight Control Board (V1.2)
+ TURNIGY Plush 30amp Speed Controller
+ Turnigy nano-tech 2200mah 3S 35~70C Lipo Pack
+ GAUI 210801 8"Props(8A and 8B) + GAUI 210802 8"Props(8A and 8B)
+ Turnigy Aerodrive SK3 - 2826-1240kv Brushless Outrunner Motor
+ TGY-306G Ultra Fast/High Torque MG Digital Alloy Cased Servo 3kg / .06sec / 21g
+ 10CM Male to Male Servo Lead (JR) 26AWG (10pcs/set)